Tips for Sizing Tractor Wheels in Wisconsin

A high-quality tractor constitutes a serious investment for most farmers, so it deserves to be treated with care. When replacing Tractor wheels in Wisconsin, it’s essential to purchase only high-quality rims and tires and to ensure that they are properly fitted to both the machine itself and to its intended use. Read on to find out more.

Sizing Wheels

It’s essential that tractor operators do their due diligence when sizing wheels and tires, as the right size wheels will dictate whether or not the tractor will be able to operate certain types of attachments. When sizing the rims, keep in mind that the diameter is measured between the tire bead seat areas, as is the width. Measurements must also be taken of bolt patterns to ensure that the new rim will fit.

Most agricultural equipment features five-bolt wheels. The size of these rims can be measured from the center of one bolt hole to the space directly in the middle of the two opposite bolt holes.

Wheel Offset

The wheel offset refers to the distance between the rim and the frame. A positive offset will move both the wheel and the tire closer to the tractor’s frame, while a negative offset will move them further away. This may impact what type of tires can be used with the rim, so it’s important to measure the offset properly from the outside of the rim to the outside of the frame.

Tire Size

There are two different ways that tire manufacturers express tractor tire sizes: standard and metric. When the standard format is used, the first number printed on the tire’s sidewall refers to its width in inches, while the second number describes the size of the wheel’s diameter.

The metric format is a little bit more descriptive, but also a little bit more complicated to understand. The first number before the slash refers to the tire’s width in millimeters, the first number after the slash refers to its aspect ratio and should be followed by an “R” and a second number; this number refers to the rim size. These numbers and letters should be followed by an additional three numerical designations: the load index, the speed index, and the tread style.

Learn More Today

Once agricultural equipment operators have determined their size requirements, it’s time to look into purchasing Tractor wheels in Wisconsin. Visit Pioneerwheel.com to get started.

Share!


    Follow Us:
    FavoriteLoadingAdd to favorites