Auto Transmission Repair Services in Wamego KS Can Keep Any Vehicle Operating Efficiently

by | Aug 14, 2015 | Automotive

All Categories

Archives

There are a number of important systems in the modern automobile, but one of the most crucial is the automatic transmission. This complex device is used to transfer the power of the engine to the wheels without the need for the driver to shift gears at higher speeds. In fact, shifting an automatic transmission is as simple as selecting the forward or reverse gears. Unfortunately, this simplicity often leads to the neglect of the transmission and the eventual need for auto transmission repair services in Wamego KS. One of the most commonly neglected aspects of the automatic transmission is the fluid level and the occasional need for fresh fluid.

Cleaning of the transmission fluid is a small job that usually requires the mechanic to remove the transmission pan. The main reason for this is the need to get to the internal filter. Once the unit is drained, the mechanic can flush the transmission with clean fluid and wash out the filter screen. This extra step will push out most of the grime that can build up inside the device. This is important because many transmissions use a series of small channels to transfer the fluid and this gunk may block the flow.

There are numerous signs that can indicate a need for Auto Transmission Repair Services in Wamego KS. For example, the transmission may begin to slip when shifting gears or the vehicle may suffer a loss of power as the transmission ages. This problem may be due to dirty fluid and the resulting lack of pressure in the system hydraulics or it could be the result of worn clutches inside the device. Most automatic transmissions use a series of thin clutches to drive the axle and turn the wheel.

A front wheel vehicle is similar in requirements to the regular one except the transmission may be smaller. Front wheel drive vehicles will also have different connection issues than the rear wheel drive model. A rear wheel vehicle uses a drive shaft to balance the angle between the differential and the transmission while the front wheel models often connect directly to the differential and use a series of bearings and half shafts to power the wheels. Contact us for more information about transmission repair and maintenance.

Similar Articles