The mechanical systems that make up your car or truck are often extremely complex, but none are more involved than the automatic transmission. An automatic transmission is a hydraulic system that uses a series of gears and clutches to power the axle and turn the wheels. Over time, the fiber on these clutches will wear down causing them to slip. This not only affects the power of your vehicle, but the material from the clutches can thicken the fluid that controls the transmission. This can result in clogging that may affect its shifting ability or cause any number of other problems.
You can control Automatic Transmission Repair Cost in Salt Lake City by having the transmission serviced regularly. Typical service can include checking the fluid level or replacing the fluid and cleaning the filter. Unlike the engine oil filter, the filter in an automatic transmission is located inside the unit. This means that the mechanic must remove the transmission pan to access it. This is the best time to have the mechanic perform another function known as a transmission flush.
The transmission flush uses high-pressure fluid to cleanse the inside of the system. By forcing clean transmission fluid through the unit, the mechanic can clean the tiny channels that the fluid runs through. Clean fluid and high pressure can quickly wash away the sludge that robs your transmission of performance. Plus, a clean filter and new fluid will help the transmission survive for many thousands of miles.
Eventually, no matter how well the transmission is serviced, it will wear out. At this point, you only choice is to have it repaired or to replace the vehicle. The latter is a very expensive option, but transmission repair can be costly as well. Sometimes, you can reduce Automatic Transmission Repair Cost in Salt Lake City by having the unit rebuilt in the shop. This is basically an overhaul of a mostly working transmission. However, it is usually better to have the unit replaced with a factory rebuilt model.
A factory restored transmission is essentially a new unit. Any parts that can wear out are replaced, but the solid components such as shafts and housing are reused. This cuts down costs and makes the rebuilt model more affordable. To learn more about transmission service or repair, contact Tanner Transmissions Inc.
